Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Redlands, CA
Gate installation in Redlands usually means working with long driveway spans, period-correct ironwork, or heavy wood gates built for the city’s distinctive citrus-belt lots. We’re a dedicated gate team, not general contractors, and we handle the full range: new automatic systems, replacement of failed operators, and custom gates matched to older homes in Smiley Heights or Mariposa. Whether you need a new sliding driveway gate or a rebuilt pedestrian gate on an original masonry column, call (844) 405-5765 for a free estimate.
Why Redlands Homes Are Different
Redlands housing stock pulls in two directions, and both shape how gates fail. The early-1900s Craftsman and Spanish Colonial Revival homes, along with later mid-century ranch houses, often sit on large lots with long side drives and original stucco or masonry walls. Those properties commonly have custom ornamental iron gates with forged pickets and cast finials, plus heavy wood driveway gates hung on columns that have settled over decades. The 1960s through 1990s tract neighborhoods are a different animal: lighter steel or aluminum gates on square posts, built to a tighter budget.
The inland heat does real work on all of it. Redlands summers run hot and dry, and the Santa Ana winds add a physical battering that loosens hinges, sags frames, and warps wood. UV exposure fades finishes and makes plastic gate hardware brittle. In the older citrus-ranch neighborhoods, we see a lot of original redwood gates from the 1930s to 1950s that have gone checked and dry to the point that a screw won’t bite. What starts as a sagging gate repair often becomes a measured rebuild because the original wood simply won’t hold hardware anymore. That’s the Redlands difference: the job is rarely a hinge swap. It’s matching what’s already there, whether that’s a fabricated iron profile or a gate scaled to a historic opening.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Redlands Services
Most Redlands callers reach out about one of two things: a gate that won’t move, or an electric operator that stopped responding. Here’s what each involves here.
Gate Repair in Redlands
Manual and mechanical gate repair in Redlands covers sagging drive gates, stuck latch hardware, broken hinges, and rotted or split wood frames. On older homes along Smiley Heights or Mariposa, we often have to weld cracked wrought iron or fabricate a matching picket rather than just replacing a hinge. The dry inland climate means post movement and UV-degraded hardware show up more than rust. See Gate Repair in Redlands for the full scope, signs, and pricing.
Electric Gate Repair in Redlands
Electric gate repair is where most of our technical work happens in Redlands. We diagnose operators, control boards, safety sensors, remote receivers, and the wiring between them, then fix the actual fault rather than swapping parts until something works. The heat here is hard on control boards and power supplies, and Santa Ana wind events can knock safety edges and loops out of alignment. That’s the kind of problem we solve in one visit. Details at Electric Gate Repair in Redlands.
Gate Installation in Redlands
Gate installation in Redlands means building a gate that fits the home, not dropping in a stock panel. On the older citrus-ranch properties around Smiley Heights and Mariposa, that often means a custom-width driveway gate matched to existing ironwork or a rebuilt wood gate sized to original masonry columns. On a 1960s-to-1990s tract home, it’s usually a lighter aluminum or steel gate on a clean, modern post set. Either way, we measure, fabricate or source, and install so the gate hangs true and cycles clean through Redlands heat and Santa Ana wind. Gate Installation covers every step, from measure to final programming, with a written price before any work starts. Call (844) 405-5765 for a free estimate.
Automatic Gate Installation
Signs you need it
You have a manual gate and you’re tired of getting out of the car, or your existing operator has failed and you want a clean replacement system installed and programmed.
What it costs in Redlands
A complete automatic gate installation typically runs $3,200 to $10,900 in Redlands, depending on gate size, operator type, and electrical work needed.
How we do it
We measure the opening, specify the operator and power supply, set posts or reinforce existing columns, run electrical, mount and program the operator, and test safety edges and remotes before we leave.
Driveway Gate Installation
Signs you need it
Your lot has a long side drive that’s open to the street, or the previous gate is too far gone to rebuild and you need a new one sized correctly.
What it costs in Redlands
Driveway gate installation in Redlands typically ranges from $1,980 to $7,200 for the gate and hardware, with automatic operators adding $1,200 to $5,400 when powered.
How we do it
We measure the drive width and slope, spec the gate material for Redlands heat and wind exposure, set posts to proper depth, hang the gate, and align all hardware so it clears cleanly.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street, or the yard doesn’t have room for a swing gate to arc inward or outward.
What it costs in Redlands
A sliding gate installation in Redlands typically runs $3,000 to $11,400, including track, carrier hardware, and operator where specified.
How we do it
We set the track and posts on compacted base, hang the gate on carriers, adjust travel and stops, and test the operator’s limits and safety reverse through full open and close cycles.
What Gate Installation Costs in Redlands
| Item | Typical range in Redlands |
|---|---|
| Single swing gate with standard hardware | $980 to $3,400 |
| Long driveway gate, custom width or iron | $1,980 to $7,200 |
| Automatic operator with control panel and remotes | $1,200 to $5,400 |
What pushes a Redlands gate installation higher is usually the site: old masonry columns that need structural work, long drive spans that need a heavier frame, or electrical runs dug through hard inland soil. The written estimate sets the final price before we start.
How long does a gate installation take in Redlands?
Most Redlands gate installations finish in one to three days from measure to final programming, depending on whether posts, electrical runs, or masonry work are involved. Custom iron or wood fabrication can add lead time. Call (844) 405-5765 for a schedule based on your gate.
Do you handle the electrical for a new automatic gate in Redlands?
Yes. We run the power, mount the operator, wire the control board and safety edges, and connect remotes or keypads as part of the installation. You get one team responsible for the whole job. Call (844) 405-5765 for a free estimate.
Brands We Service in Redlands
We work on the brand you already have. Our technicians are factory-familiar with BFT, Linear, Viking, and Ghost Controls systems, among others, and we carry common control boards, remotes, and safety-edge parts for faster Redlands turnarounds. See our brands for the full list of systems we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Redlands, CA
| Service | Typical range in Redlands |
|---|---|
| Hinge and latch repair | $145 to $520 |
| Sagging gate realignment | $230 to $740 |
| Wood gate rebuild, standard size | $520 to $1,700 |
| Custom iron welding repair | $280 to $1,050 |
| Electric operator replacement | $950 to $4,700 |
| Control board replacement | $520 to $2,100 |
| Safety sensor or loop repair | $250 to $780 |
| Single swing gate installation | $980 to $3,400 |
| Automatic gate installation, complete | $3,200 to $10,900 |
Redlands prices land on the higher side when we’re matching period ironwork or rebuilding a long citrus-ranch driveway gate’s frame and hardware together. Every estimate is free, and the price we agree on before work starts is the price on the invoice.
Neighborhoods We Serve in Redlands
We cover Redlands broadly, from the estate lots and carriage-house properties in the older hillside neighborhoods to the tract developments built through the 1980s and 1990s. Gate work in the older areas usually means matching existing iron or wood profiles; in the newer tracts it’s mostly operator and panel replacement.
- Smiley Heights
- Mariposa
- South Redlands
- Sunset Drive area
- North Redlands
Most of Redlands is within a short dispatch window for us, and we typically reach address-level calls across the city in one trip.
Service Area – Cities Near Redlands
Along with Redlands itself, we take gate jobs in the surrounding Inland Empire foothill and valley cities. If you’re just outside the city line, we can usually schedule you within the same week. We serve Mentone, CA, Highland, CA, Colton, CA, and Yucaipa, CA, with the same specialist team and written pricing.
Serving Redlands, CA – Our Local Coverage Area
We serve Redlands and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Redlands
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Most Redlands repair calls are scheduled same-day or the next opening. Call (844) 405-5765 and we’ll tell you what’s available.
Permit requirements vary by project scope and location, especially for powered gates with electrical runs or anything attached to a masonry wall. Ask Redlands’ building department what applies to your property, and we’ll build to the approved scope.
Yes. We fabricate or source profiles that match the forged pickets, cast finials, and overall look of your existing gate rather than bolting on a stock panel. Bring us a photo and we’ll tell you what’s possible. Call (844) 405-5765 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Redlands Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Nicole Rhodes"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Shane Ziegler"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Dale Fletcher