Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lake Arrowhead
An electric gate that won’t open at 9pm on a cold mountain night isn’t a small problem. It’s your only way up the driveway. We understand that in Lake Arrowhead, a failed gate operator can leave a car idling on a winding private road with no shoulder and no turnaround. Our electric gate repair team treats every Lake Arrowhead call as a priority. We answer 24/7 and dispatch a technician fast from 7am to 7pm, Sunday through Friday. Call (844) 405-5765 and tell us what the gate is doing. We’ll tell you what we think before we ever set foot on your mountain road.

Why Lake Arrowhead Homeowners Call Gate Repair Redlands for Electric Gate Repair
We’re gate specialists, not generalists. That’s the reason a property manager in Lake Arrowhead who manages three vacation rentals uses one phone number for all of them. They know we work on whatever operator is already bolted to the post. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule. We diagnose the system, not the brand, and we don’t push a replacement when a control board or a pair of safety sensors fixes the problem. Lenny Gentry built this company on that honesty. A gate that’s been dragging on a decomposed granite driveway for two years doesn’t need a sales pitch. It needs a tech who’s seen what freeze-thaw does to a shallow footing at 5,000 feet.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Access Control in Lake Arrowhead
Gate access control in Lake Arrowhead usually means one of three setups: a keypad on a post, a remote control in the console of a truck, or a telephone entry system at the bottom of a steep shared driveway. The job involves matching the access hardware to the operator’s control board, wiring it clean, and setting the relay so the gate holds long enough for a car to clear the sensor loop. We handle keypad repair, remote control programming, and intercom systems. When a guest forgets the code on a Friday night and the property manager is in Riverside, we can get the gate open and the code reset.
Keypad and Intercom Integration
Older mountain gates often have a keypad that’s been sun-faded and half-functional for years. We can replace just the keypad and leave the existing operator in place. If the property has a telephone entry system, we check the relay wiring and the antenna, because poor reception on a tree-covered slope is a common source of intermittent failures.
Remote Control Replacement
Remotes get dropped on gravel, run through the wash, and left in cold cars all winter. Reprogramming a replacement remote to an older operator takes minutes, not hours, if the tech knows which learn button sequence that particular board uses. We do.
Commercial Gate Operator in Lake Arrowhead
A commercial gate operator in Lake Arrowhead often guards a small HOA, a campground entrance, or a utility road off Highway 189. These operators cycle more than residential units and the mountain makes them work harder. Dust from decomposed granite gets into the chain drive. Ice forms on the actuator arm. The freeze-thaw cycle works bolts loose on the mounting plate. We service commercial operators from BFT, Linear, and Viking, plus the older DoorKing and Elite units that many mountain HOAs still run. The work usually falls into two groups: repairing what’s there, or replacing an operator that’s past the point where parts are available.
Slide Gate Operators on Sloped Lots
A slide gate on a commercial property needs the track, the wheels, and the operator all in line. When the ground heaves, even an inch of shift makes the operator strain and eventually trip its internal overload. We check the full run of the track and re-align the rack before we condemn a motor.
Safety Loop and Sensor Testing
Every commercial operator should reverse on a safety loop fault. We test that, plus the photoelectric sensors, as part of any repair. If a loop was cut into asphalt 15 years ago and has been patched over twice, it may need replacing longer than just the wire.
Trusted Brands We Service in Lake Arrowhead
We work on the brand you already have. That’s the honest answer when someone in Lake Arrowhead asks which operator we prefer. We’re brand-agnostic. Our techs know the quirks of LiftMaster’s older belt drives, the odd relay click on a FAAC that’s been snowed on, and the programming menu on a Ghost Controls that a homeowner bought online and never quite finished installing. We stock common control boards, remotes, safety sensors, and hinge parts for BFT, Linear, and Viking systems on our trucks when we head up the mountain. If we have your part, you’re back in service same day. If we don’t, we order it and schedule the return visit before we leave your driveway.

See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Lake Arrowhead Homes
- Gate drags on the driveway apron after winter. This is the classic Lake Arrowhead failure. The hinge post heaves slightly out of plumb, the gate sags, and the operator strains to push a gate that’s scraping decomposed granite. We re-set the post in a deeper footing and re-align the gate rather than just bolting on a bigger motor.
- Control board fails after a freeze-thaw cycle. Older operator boxes crack, moisture reaches the board, and corrosion kills the relay. On a 1990s LiftMaster, a cracked box usually means it’s time to talk honestly about whether a new slope-rated operator costs less than nursing the old one.
- Pine needles and resin gum up the track and rollers. San Bernardino National Forest tree cover drops needles, sap, and duff onto slide tracks and roller channels. We clean the track and rollers, flush the bearings, and adjust the operator so it isn’t fighting the buildup.
- Rust seizes hinges and the operator strains. Winter moisture at elevation rusts iron hinges and galvanized steel posts faster than people expect. We carry replacement hinges and can swap a seized set without replacing the entire gate.
Pricing for Electric Gate Repair in Lake Arrowhead, CA
Electric gate repair in Lake Arrowhead runs on a range, and we give you the written number before we start. A stuck keypad or a remote programming call typically runs $85 to $175. A failed safety sensor or a corroded wire connection lands around $125 to $250. A control board replacement, depending on the brand and age of the operator, runs $300 to $700 installed. A full operator replacement on a steep driveway with a new slope-rated unit can run $1,800 to $4,200 when we’re also setting posts and re-running the power drop. The estimate sets the final price. You agree to it before we pull a tool off the truck. Call (844) 405-5765 for a free estimate.
We Also Serve Cities Near Lake Arrowhead
Our gate techs drive up from the valley and cover the whole San Bernardino mountain corridor. That includes Crestline, Highland, Mentone, and San Bernardino. If your property sits on a shared road or a fire-access lane, call us. We’ll work out the access details before dispatch. This is what we do, from the motor to the hinge, anywhere the mountain throws a gate problem at you.
Serving Lake Arrowhead, CA – Our Local Coverage Area
We serve Lake Arrowhead and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lake Arrowhead
Sometimes yes, sometimes no. If the board is from a system we still source parts for, we can retrofit a newer board into the existing operator box, usually for $300 to $700. But if the operator box is cracked and moisture has been getting in for years, replacing the board alone is throwing money at a losing battle. A new slope-rated operator often costs less over three years than two board replacements and a fried transformer. Call (844) 405-5765 and Lenny Gentry will tell you straight which path makes sense for your gate.
Because the ground moved. Lake Arrowhead sits on decomposed granite with shallow footings. When water gets under the post and freezes, it heaves the post out of plumb. Your gate sags, the operator strains, and the leaf drags on the apron. We re-set the post deeper, brace it, and re-align the operator. That’s the fix, not a hinge swap.
Your gate sat unused for weeks. Batteries in the keypad may be weak, the remote codes may have timed out, or a pine needle mat jammed the track. We see this every Friday night in Lake Arrowhead. We answer 24/7, and we’ll dispatch a tech fast from 7am to 7pm, Sunday through Friday, to get your guests through the gate.
We recommend them on every automatic gate, especially on a rental property with guests, kids, and delivery trucks. Many pre-2000 gates in Lake Arrowhead were installed without modern photo eyes or reversing edges. Most cities require an upgrade when the operator is replaced, so ask your city’s building department. We install safety sensors and loop detectors as part of any operator replacement.
Not always. A slope-rated operator is usually the answer when the existing unit wasn’t sized for the grade. But some older operators can be adjusted to hold better, provided the post is plumb and the gate is balanced. We’ll test the gate’s weight and the motor’s draw first. If the math says the old unit is undersized, we’ll show you the numbers before you spend anything on a new one.
For electric gate repair in Lake Arrowhead, call (844) 405-5765. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, and the price is written before any work starts.
Written by Lenny Gentry, Owner at Gate Repair Redlands, serving Lake Arrowhead since 2018.