Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Mentone
When an electric gate stops working in Mentone, the problem is rarely what a general handyman expects to find. Most calls we take from Mentone involve gates on long gravel or dirt driveways, often powered by solar or low-voltage operators with wire runs stretching hundreds of feet from the house. The gate still looks fine. The motor sounds like it is trying. But dust has packed the tracks, or a solar panel has a film of grit across it, or voltage has dropped over that long wire run. That is the real job in this town. We answer 24/7 at (844) 405-5765, and we dispatch a gate technician to Mentone fast, from 7am to 7pm, Sunday through Friday. The estimate is free and the price is set before any work starts.

Key Takeaways
- Mentone’s dust, heat, and long rural driveway runs cause failures that look like motor trouble but are usually track fouling, solar panel buildup, or voltage drop.
- We repair the gate system you already have, including LiftMaster, BFT, Linear, Viking, Ghost Controls, and other brands.
- Free on-site estimate. Written price up front. No work begins until you approve it.
- Call (844) 405-5765. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Why Mentone Homeowners Call Gate Repair Redlands for Electric Gate Repair
Mentone is not Redlands. The lots are bigger, the drives are longer, and a lot of the gates out here are working farm gates, not decorative front-entry gates. Our electric gate repair team knows the difference because we work both towns and everything between them. A gate that would take twenty minutes to fix in a tight Redlands cul-de-sac can take an hour of real diagnosis on a half-acre Mentone property with a 14 or 16-foot slide gate and a control board mounted on a post near the barn.
We get called to properties off Crafton Avenue, up toward the foothills, and along the numbered streets in 92359. The gates we see are swing gates on pipe posts, slide gates on V-track, and gate operators that run on solar with battery backup. We do not push replacement equipment. We start by finding what is actually wrong. Lenny Gentry built this company around that approach, and our customers in Mentone respect it.
Our reputation in Mentone is built on showing up when we say we will and fixing the gate without a sales pitch. If a control board can be repaired, we repair it. If a solar panel just needs cleaning and a battery swap, we say so. If a gate really is beyond saving, we tell you that straight and show you what a replacement would cost before we touch anything.
Electric Gate Motor in Mentone
Electric gate motor work in Mentone usually starts with a call that says the gate opens halfway, makes a grinding noise, or will not move at all after the Santa Anas blew through. Before we condemn the motor, we check the whole path from the operator to the gate itself, and out here that path is often long, dusty, and wired through conduit that has been in the ground for years. A typical motor replacement or repair in Mentone runs $380 to $950 depending on the operator type, whether it is a swing arm, slide gate motor, or solar DC unit. The written estimate sets the final price.
Diagnosing Voltage Drop on Long Runs
Mentone properties often put the gate a long way from the house panel. When a low-voltage operator runs on wire that is undersized or aging, the motor receives less voltage than it needs. The gate moves slowly, trips the overload, or just hums. We measure voltage at the operator itself, not at the house, because a reading at the breaker tells you nothing about what is happening at the gate.
Solar Motor Repair and Battery Replacement
Many Mentone gates run on solar operators with sealed lead-acid or lithium batteries. The inland summer heat shortens battery life, and dust from the open lots settles on the panel. We clean the panel, test the battery under load, and replace it when it can no longer hold a charge. The motor is usually fine. The power source is not.
Gate Access Control in Mentone
Gate access control in Mentone covers a lot of ground: keypads, remotes, intercom boxes, vehicle loop detectors, and the control boards that read all of them. On a rural property, access control has to work from both sides of the gate, and it has to stand up to dust, sun, and temperature swings from below freezing to triple digits. We replace keypads, reprogram remotes, repair or install loop detectors under gravel driveways, and troubleshoot boards that will not respond to anything. Access control repair in Mentone typically runs $150 to $600 per component depending on what has failed. All work is quoted in writing before we start.
Loop Detectors on Gravel Driveways
The loop detector is the part that tells the gate to stay open when your truck is sitting on the driveway. On a graded dirt or gravel drive, these loops get damaged by erosion, tire ruts, or re-grading work. When a gate closes on a car or will not auto-open for exiting traffic, the loop is often the culprit. We trace the loop wire, find the break or bad splice, and repair it or install a new loop without tearing up more driveway than necessary.
Remote and Keypad Programming
Remote controls and keypads fail for simpler reasons in Mentone: sun-baked housings, corroded battery contacts from temperature swings, and keypads that fill with fine grit. We stock common remotes and can program most brands on site. If the problem is in the receiver or the board, we find it rather than handing you a new remote and hoping it works.

Trusted Brands We Service in Mentone
We work on the brand you already have. That means LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Gate Repair Redlands is brand-agnostic by design, so we never steer a Mentone customer toward a replacement just because we prefer a certain manufacturer. We carry a rolling stock of common parts, and for less common failures we can usually have the part in hand quickly. Electric gate diagnosis starts with understanding the system, not swapping parts. That is how we keep repair costs down on older and solar gear.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Mentone Homes
- Slide gates binding on packed tracks. Windblown sand and grit off the foothill lots fills V-track and chain drives, especially on dirt driveways in spring and fall. The gate chatters, stalls, or trips the obstruction sensor. We pull the covers, clear the tracks, and adjust the limits so the gate runs clean again.
- Solar panels that look fine but are not charging. A thin layer of dust and pollen cuts panel output enough that the battery never gets back to full, especially on shorter winter days. The gate works in the morning and is dead by afternoon. We clean, test, and replace batteries when they have sulfated from repeated deep discharge in the heat.
- Sagging swing gates on long rural posts. A 14-foot pipe-frame swing gate puts a lot of load on the hinge post. Heat, dry soil, and Santa Ana wind work the post loose over time. The gate drags on the opener side and the motor strains. We rehang the gate, reinforce the post footing, and set the opener travel so it does not fight the hardware.
- Control board confusion after power events. Outages and brownouts in the East Valley scramble settings on older boards. The gate forgets its remotes, the timer closes wrong, or the board goes dark entirely. We reprogram or replace the board and set the limits cleanly in one visit.
Pricing for Electric Gate Repair in Mentone, CA
Most electric gate repairs in Mentone fall between $180 and $950. A remote or keypad replacement sits at the low end, around $150 to $250. A control board replacement runs $350 to $650. Full motor replacement on a slide or swing gate lands between $650 and $950 including the operator and labor. Solar system repairs, including panel cleaning, battery replacement, and voltage troubleshooting, typically run $250 to $500. These are typical Mentone market ranges, and the written estimate you approve is the number you pay. The estimate is free. Nothing gets replaced without your sign-off.
Call (844) 405-5765 for an exact quote on your gate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Mentone
Gate Repair Redlands serves Mentone and the surrounding foothill, valley, and residential communities across the East San Bernardino Valley. Our service area includes Electric Gate Repair throughout the region, and we regularly send technicians to properties in Redlands, Yucaipa, Highland, and Calimesa. We know the back roads, the dirt drives, and the gate styles common to each community. If you are in Mentone or just outside it, call us and we will tell you exactly when we can be there.
Serving Mentone, CA – Our Local Coverage Area
We serve Mentone and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Mentone
Mid-travel stops in Mentone are almost always track or wheel problems, not motor failure. Sand and fine grit pack into the roller track or rack and pinion, the gate hits resistance, and the operator’s obstruction circuit stops it rather than burning out the motor. We clear the tracks, check the rollers, and reset the limit switches. If the track is bent or the wheels are shot, we replace them. Call (844) 405-5765 and we will diagnose it on site.
The panel is not charging the battery fully, or the battery can no longer hold a charge. Dust film on the panel cuts output, and summer heat sulfates lead-acid batteries. The gate gets through the night on a partial charge, uses it up by mid-day, and goes dead. We clean the panel, load-test the battery, and replace it if it fails. This is a routine fix, not a motor replacement.
Yes, that is a core part of our electric gate repair work in Mentone. Long slide gates on gravel drives take a beating from windblown grit, ruts, and shifting ground. We work on the track, the rack, the wheels, and the operator as one system. The fix is usually track cleaning and adjustment, wheel replacement, or operator limit correction, and we quote it in writing before starting.
Electric gates in California must have working entrapment protection, and that applies in Mentone as much as anywhere else. The specific requirements depend on the gate’s age and installation date, so we recommend checking with the city or county on current standards. Practically, that means the safety edges, photo eyes, and reversing mechanisms all need to work. We test those on every repair and will not leave a gate operating without functional safety devices.
Usually yes. Sag on a Mentone swing gate is typically from a post working loose in dry soil or hinge wear at the post side, not a bent gate frame. We rehang the gate, tighten or replace hinges, and reinforce the post footing where needed. The gate can often be saved, and we will tell you honestly if it cannot. The estimate is free, so you will know the number before you decide.
What Happens When You Call
You call (844) 405-5765. We answer 24/7. A gate technician is dispatched to Mentone from 7am to 7pm, Sunday through Friday. We schedule a free on-site estimate, look at the whole system from the motor to the hinge, and give you a written price before any work starts. If the gate needs a part we do not have on the truck, we tell you the cost and the timeline up front. On most Mentone repairs, the gate is back to secure in one visit.
Written by Lenny Gentry, Owner at Gate Repair Redlands, serving Mentone since 2018.